Archive for the ‘bathroom plumbing’ Category

« Older Entries

New Fixtures: A Low Cost Way for Coppell Homes to Brighten a Kitchen or Bathroom

Monday, May 14th, 2012

Many homes Coppell are in desperate need of new plumbing installations because they still have the original faucets, toilets, shower heads, and other plumbing fixtures installed by the builder. Like most contractor-grade components, those fixtures were  probably designed to be strictly practical, with very little styling or decorative flair.

Contractors aren’t architects or interior designers. They’re focused mainly on installing the infrastructure of the plumbing system – the water delivery and waste pipes. It’s not their job to pick out elegant or cutting edge fixtures. They also can’t predict the taste of a home’s future occupants, so it makes no sense to install distinctive fixtures that might be removed or, worse, contribute to a potential buyer’s negative impression of the home.

That means many homeowners spend years living with plumbing fixtures deliberately intended to be bland and unnoticeable. There’s nothing wrong with that, but consider how many times each day we use our bathroom and kitchen faucets. How many times per week do we take a bath or use the shower? The simple pleasure of seeing and touching an attractive, well designed faucet is a little perk that can help brighten the day.

Higher end plumbing fixtures can be pricey, but factor in how long most fixtures last and you’re only paying a few pennies or less per day. Plumbing fixture design has become much more consumer-driven. Companies must compete by offering an expanding variety of styles.  The new passion for cooking has increased the demand for professional grade kitchen faucets that can stand up to hard use, have pullout sprayers, and accommodate large pans. New shower head designs provide a more comfortable, invigorating spray. Sink faucets with elegant finishes of bronze, brushed nickel, or brilliant brass can liven a bathroom. Ergonomically correct handles are easier to use and more inviting to touch.

There are also practical reasons for replacing fixtures. With improvements in materials technology the interior seals of faucets and other fixtures are more resistant to mineral build up and corrosion that can cause leaks. Metal finishes are more durable and resistant to dulling from soap or detergent.

Installing a new, attractive faucet won’t provide a total kitchen or bathroom plumbing makeover, but it will provide a spark that brightens the room and makes everyday living just a little more fun.  So give Dial One Johnson Plumbing a call when you are ready for a plumbing upgrade.

Tags: , ,
Posted in bathroom plumbing, New Plumbing Installations, Plumbing | Comments Off

All You Need to Know About Showerheads in Frisco

Monday, April 30th, 2012

Waking up to a cold morning is not always the easiest thing, but a nice warm shower can make that struggle a little more pleasant.  All of the warm, relaxing, therapeutic water is delivered to us by the terrific bathroom plumbing invention, the shower head.  This blog post is designed to provide readers with all the information they will ever need to care for their shower head, and how to get the most out of their reliable shower head.

Prior to 1994, shower heads had a flow rate of 5 ½ gallons per minute, but since then with the involvement of the EPA the flow average rate per shower head has decreased to an average of 2 ½ gallons per minute, thus conserving half the water which used to be wasted in this one area of the home.  If you are looking for a top of the line plumbing installation for your next shower head, do not be misled by price: the highest price-tag is not always the best; some of the top-rated shower heads are quite reasonably priced.

Shower Head Types

There are a number of shower head types which offer a variety of functionality, some with incredible water-efficiency.

  • Multi-Setting Models:  Provide adjustable flow patterns up to as many as twelve settings such as massage, mist, wide stream, narrow stream, pulsing, and even a water-saving trickle while applying soap or shampoo.
  • Single-Setting Models:  Provide one setting and tend to cost considerably less than their multi-setting counterparts.
  • Multi-Head Models:  Provide a spa-like experience in your own home with a fixed or handheld shower head as well as several body jets mounted on a vertical tower.  However, with such comfort comes a higher price tag.  These are the most expensive to purchase, install and run, oftentimes using as much as 10 gallons per minute of water.
  • Custom Models:  Modern showers are created with unique shower head designs, from luxury panel showers, to artistic expression through shower heads with special lighting, to pocket showers which can be taken on the go and are in essence a waterproof reservoir which holds enough water to have an outdoor shower while camping

Shower Head Features

  • Aerating Shower Heads:  Mix air with water, producing a misty spray which makes the water-flow feel more substantial, and they don’t create as much steam and moisture.
  • Handheld Shower Heads:  Leave it in the holder or remove it to focus the spray on a particular body-part, allowing for quicker cleaning and rinsing.
  • Rain Shower Heads:  Large heads and wide spray patterns provide a soft, soothing flow of water.
  • Low-Flow Shower Heads:  Features can include a pause button to start and stop water during the shower, a shower timer to manage the time spent in the shower, a temperature gauge which keeps water-flow to a trickle until the desired water temperature is reached, and water volume controls to let you manually adjust the gallons per minute.

From shower head types to shower head features, this should give you all you need to know about shower heads in order to make an informed decision on what type of new shower head is right for your home and lifestyle.

Please call Dial One Johnson Plumbing if we left out any information about shower heads you need or if you need other bathroom plumbing questions answered.

Tags: , ,
Posted in bathroom plumbing, Plumbing, Plumbing Installation | Comments Off

Common Toilet Problems in Dallas

Monday, April 23rd, 2012

An essential aspect of Dallas plumbing is the reliable toilet. Unfortunately this crucial plumbing machine is susceptible to a handful of problematic issues. This blog post will walk the every day home owner through the basics of toilet repair and bathroom plumbing.

  1. Running
    We have all been a victim of the ominous constant running of toilet water. The sound alone is an irritant because it represents an unavoidable chore of bathroom maintenance, but if that was not enough, it can be the reason for higher water bills and cause your septic tank to overflow.  Fortunately, it is simple to diagnose and fix. Just look into the tank at the flapper. If it is not seated properly, adjust the chain to give more slack. If that doesn’t solve the problem, the flapper may be worn and need to be replaced. You can buy a new one at your local hardware store and install it yourself easily.
  1. Slow draining bowl
    Also known as a weak flush, this one is also fairly easy to fix. A weak flush is usually caused by clogged flush holes, which are underneath the rim of the bowl. Using a mirror to see, poke a bent wire coat hanger into each one to remove any clogs.
  1. Phantom flush
    Although it won’t actually flush, sometimes you may hear the tank spontaneously start to refill as though someone has just flushed. This just means the water is leaking out of the tank, which can usually be fixed with a new flapper, as with problem #1.
  1. Suction sounds
    If you flush the toilet and hear sucking or gurgling sounds emanating from the tub or sink, that usually indicates a clogged vent pipe. Such clogs usually originate in the roof, such as a dead bird falling into vent pipe up there. You may be best served by calling a plumber to fix this one, in order to avoid making the problem larger.
  1. Clogged or overflowing
    Lastly, of course, is the clogged or overflowing toilet. While wearing gloves and holding your nose, use a plunger or pipe snake to clear the drain. If that doesn’t get it done, the clog may be too large to handle without professional equipment, so you had better call a plumber.

Please give Dial One Johnson Plumbing a call if you need any help with these tips.

Tags: , ,
Posted in bathroom plumbing, Dallas Plumbing, Plumbing | Comments Off

Dallas Plumbing Tips: How and Why to Recaulk Plumbing Fixtures

Monday, April 16th, 2012

Most home owners do not have enough time to tend to the caulking, drain cleaning, fixture maintenance or almost any plumbing in Dallas. We take our bathrooms for granted because they typically are typically fully functional, we never really see the engineering that must occur for everything to work, so it is hard to notice there is an issue until it is obvious.

The thing about caulking, and most bathroom plumbing, is that something can go wrong with it rather quickly. Because of the high frequency of use of tubs and sinks, the caulk that seals the space between the fixture and the wall can deteriorate and crack over time. This can cause gaps in the caulk or cause the fixture to come loose from the wall.

When this cracking and erosion happens, water from your bath, shower head or faucet can seep in between the fixture and the wall, potentially causing water damage and fostering colonies of mildew and mold.

Cracked caulk is inevitable with daily use, so you don’t need to worry about preventing it. Instead, learn how to properly fix the situation with a fresh caulk job:

  1. Scrape away all the old caulk from around the fixture using a utility knife or putty knife. Take care to remove all the old caulk while also avoiding scratching porcelain fixtures.
  1. With all the caulk gone, clean out the joint thoroughly. This will remove any last traces of caulk, as well as any other dirt or buildup. If you notice mildew or mold, use a chlorine bleach solution to clean the joint before recaulking.
  1. Once the joint is dry, recaulk it using a bead of caulk that is just slightly wider than the joint. This ensures an adequate seal. Wipe any excess away with a rag.
  1. Allow the caulk to dry thoroughly before using the sink or tub. Read the instructions on the caulk for an estimated drying time.

Take note that it is very important to thoroughly remove all the old caulk and clean everywhere along the fixture joint before applying the new caulk. Otherwise, the new caulk will not adhere properly and potentially damaging dirt may get sealed into the joint.

If you followed all the steps carefully, you should have a fresh seal of caulk that will last you another several years!  If you need any help please call Dial One Johnson Plumbing for assistance.

Tags: , ,
Posted in bathroom plumbing, Dallas Plumbing, Plumbing | Comments Off

Dallas Plumbing Tips: How to Use a Plumber’s Snake

Friday, March 16th, 2012

Let’s say your kitchen plumbing in Dallas is backed up and you can’t prepare dinner. Or your toilet is plugged and even the plunger isn’t fixing the problem. It may be time to call for the snake – plumber’s snake that is.

For those of you who are intimidated by tools, take note: you have nothing to fear from the snake. It is easy to operate and is an effective alternative to expensive plumbing repairs.

Okay, so you’ve decided to use a snake to unclog your pipe. Do you have one? If you rarely use a snake in your home you might want to consider renting one. Most tool rental shops have snakes in varying sizes for rent – from hand-held to electric. But it is a good idea to have one around for emergencies and you can find hand-held snakes for under $10 (often named “augers”).

The first thing you need to do is prep for the job. Make sure you have cleared out an area to work on the plumbing and that you have plenty of rags to mop up any spills or drips. It is a good idea to lay down some newspaper or plastic to keep the floor and cabinets dry, too.

Make sure you have access to the pipe by removing any drain covering. Obviously you will have directly access to the toilet drain. Before operating the snake you should put on a pair of rubber gloves to protect your hands from the metal coils of the snake and any debris that might be in the pipe.

Next, slowly feed the snake into the pipe. You may have to turn the snake in a clockwise direction to move it along. Once you have reached the clog – and you can usually tell when the snake stops feeding – it is time to rotate the snake into the clog and loosen it up. The head or tip of snake should be able to grab on the debris so that you can pull it back out and dispose of it. In the process, some of the debris may wash away down the pipe and that’s okay (well, as long as it doesn’t accumulate further down the circuit). You really want to use the snake head to “chew up” the debris for removal, rather than just pushing it further down the pipe.

Once you have removed the debris clogging the pipe, run hot water down the pipes to wash away any remnants. Replace the drain cover if necessary and clean up your mess. Voila!

If you have a stubborn clog that won’t snake out or if you just aren’t comfortable using a tool, call Dial One Johnson Plumbing to save you the effort.

Tags: , ,
Posted in bathroom plumbing, Plumbing, plumbing repair | Comments Off

Bathtub Faucets and Fittings for Frisco Homes

Wednesday, March 7th, 2012

Buying new bathtub faucets and fittings for a Frisco home can be a lot of fun. But it can also be a bit overwhelming simply because there are so many options out there. And the types of faucets and fittings you choose will have a big impact on the overall cost bathroom plumbing. That is why it is a good idea to learn a little bit about your options ahead of time so that you know more or less what you are looking for when you actually get into the store.

To begin with, you will have to decide whether you want brass or plastic fittings. Plastic fittings are generally cheaper, but they also do not last as long and are more prone to chipping and cracking. Brass, on the other hand, might cost you a bit more up front, but it will last you longer and serve you better.

Brass faucets and fittings are available in a wide range of styles and finishes, so you can comb through the options to find the one that best fits with the theme you are going for in your bathroom. However, you should keep in mind that some of the available finishes for brass fixtures and faucets require specific care so that they do not tarnish. Make sure that whatever brass fittings and faucets you buy are a kind that you will be willing to care for properly.

For plumbing purposes, you should also keep in mind that the majority of the functional part of your bathtub faucet will be located behind the wall of the tub. That can make repairs and replacement of faulty parts a bit more difficult than on a regular sink faucet, so you want to make sure you do not have to get in there to fix something very often.

And the best way to ensure that is to opt for a slightly higher quality fitting and faucet. It may cost you a bit more up front, but it will be well worth it to you in the long run. Even with these restrictions, there are still plenty of options out there so you should have no trouble finding one that suits your sense of style while still offering high quality performance for a reasonable price.  If you have any questions about this please call Dial One Johnson Plumbing.

Tags: , ,
Posted in bathroom plumbing, Plumbing, Pluming Replacements | Comments Off

Do Low-Flow Toilets Work in Frisco?

Friday, February 17th, 2012

Low flush toilets have been available in Frisco since 1994 and are highly recommended both by the government and multiple green organizations to help reduce the water use in your home. But, the big question you probably have is whether these highly popular alternatives to regular toilets in fact work.

The Numbers

To start with, low flush toilets use less than half as much water to flush as a normal toilet. The average standard toilet uses 3.5 gallons per flush, while a low flush toilet uses only 1.6 gallons per flush. Some new toilets even use less – with the new High Efficiency Toilet (HET) standards setting the maximum flush capacity at 1.3 gpf.

While those toilets did not always perform to optimal standards when they were first released 17 years ago, they have come a long way and now operate almost identically to standard toilets. In fact, most public and restaurant restrooms built in the last 15 years now use these types of toilets instead to save money.

Choosing a Model that Will Work

There are a number of ways to measure different toilets. Just like almost any fixture, the manufacturer, design, and construction of a low flush toilet will determine how well it works. So, while for the most part low flush toilets work like normal toilets, you should take some things into consideration.

To start with, you must choose between either a siphonic or wash-down style toilet. The siphonic toilet uses much more water in the bowl, but as a result has a lot higher chance of clogging. The wash down method uses far less water in the bowl and does not clog as much, but the result is a somewhat tougher to clean interior of the toilet.

Pricing

The lowest prices may not represent the best low flush toilets on the market, but neither do the highest prices. Look for mid-range prices from competitive manufacturers. For less than $300, you can often buy a solid low flush toilet that will not clog any more often than a standard toilet and will save a tremendous amount of water and energy each year by reducing the amount of water flushed.

Low flush toilets are effective, inexpensive and largely popular for a good reason – they work. So, if you are doing any plumbing replacements or simply want to make a change to the toilet you currently have, consider installing a low flush toilet to take advantage of green energy technology that is freely available for your bathroom.  Please contact Dial One Plumbing with any questions.

Tags: , ,
Posted in bathroom plumbing, Plumbing, Pluming Replacements | Comments Off

Red Oak Plumbing Tips: How to Replace a Toilet Seal

Friday, February 10th, 2012

As an intelligent Red Oak resident I’m sure you have seen how the base of your toilet meets the floor, and you noticed a bead of caulk sealing the base of the toilet to the floor. While this watertight seal is important, there is actually a more important seal hidden within the base of the toilet.

Inside, your toilet sits on a wax ring that serves to keep sewer odors from wafting into the room, seal water from leaking from the bathroom plumbing and provides a degree of stability to the toilet installation. You may need some plumbing maintenance if:

  • You notice leaking water at the base of the toilet.
  • You smell sewer odors in your bathroom.
  • The toilet is unstable or rocks side to side at all.
  • The toilet was removed temporarily for any reason, such as replacing it or putting down new flooring.

As it happens, replacing the toilet seal is a fairly simple and inexpensive operation that you can do on your own. To take care of this job yourself, follow these 16 steps:

  1. Shut off the water supply.
  2. Empty the bowl and tank by flushing the toilet. You may have to flush twice.
  3. Get the bowl and tank completely dry by soaking up any remaining water with a sponge, rag or towel.
  4. Remove the bolts that attach the base of the toilet to the floor.
  5. Disconnect the supply line the leads into the toilet.
  6. Gripping the bowl, rock the toilet gently back and forth to break the seals.
  7. Lift the toilet free from the floor.
  8. Now you can see the remnants of the old wax ring. Remove all that thoroughly.
  9. Place the new seal in place of the old one, centering it exactly, with the rounded side up.
  10. Replace the toilet over the seal and flange.
  11. Have a seat! No, really; this helps to create a new seal between the ring and the toilet.
  12. Reattach the nuts you removed from the base.
  13. Reconnect the water line.
  14. Turn the water supply back on.
  15. Flush the toilet, looking carefully for any leaks.
  16. Apply a new bead of caulk to the bottom of the bowl to complete the sealing job.

If you have any questions about this please call Dial One Plumbing.

Tags: , ,
Posted in bathroom plumbing, Plumbing, Plumbing Maintenance | Comments Off

Where Are the Shut Off Valves in a Dallas Home?

Wednesday, February 8th, 2012

Whenever you want to do plumbing repairs in Dallas, whether it is to change a leaky faucet or fix knocking pipes, you need to shut off the main water line, or supply. But, most home owners do not know where their main shutoff valves are, especially if they have just moved in or are renting a home that is unfamiliar to them. To help, here are some common places you can look for shutoff valves in your home.

  • Water Meter – The Water Meter, which you can usually find in your basement or just outside your home, will have a shutoff valve attached directly to it. Usually there will be two shutoff valves – one on each side of the meter (supply and home). To effectively shut off your water supply, turn the valve located before the meter.
  • Toilet Supply – Sometimes you do not need to cut off the main water supply to your entire house if you’re just doing bathroom plumbing. It can be disruptive and the people in your home may not appreciate not having drinking water or a shower while you are working on the plumbing. So, when working on the toilet, always look for the toilet water valve located behind the tank. Sometimes this valve will be on the floor – other times it will be located on the wall just behind the tank.
  • Finding Wily Supplies – Sometimes the water supply may not be located where you would expect. It might be behind appliances or access panels or above your head somewhere. Most of the time, the water supply will still be in the basement, so start there and look carefully for the root of the pipes. Since most of the pipes in your home will originate at the supply line, you can usually trace them back to a single source.

If you still cannot find your main water supply line and shutoff valve, that does not mean it is hidden in the floor somewhere or outside. Sometimes, the supply lines are just in odd places, either because of strange construction or poor renovations by a past owner. If this is the case, get a second pair of eyes to help you hunt or as a last ditch option, call a plumber who will be able to more easily follow the lines back to their source. Nine times out of ten, you should be able to find and handle a main water supply on your own. But never rule out calling Dial One Plumbers if things get more complicated than anticipated.

Tags: , ,
Posted in bathroom plumbing, Plumbing, Water Line | Comments Off

How to Extend the Life of a Water Heater in Desoto

Friday, February 3rd, 2012

To avoid having to pay for replacing your water heater in Desto, your best course of action is to take care of the water heater you have. Many homeowners forget about this simple part of household maintenance, probably because water heaters are so often out of sight that we take them for granted. For a simple start on water heater maintenance, try this three-step annual routine:

1.     Lower the temperature on your water heater to somewhere between 115 and 120 degrees Fahrenheit. This is more than adequate for all household functions, and it will keep the water heater from overheating. Locate the knob on your unit (refer to the manual or manufacturer website if you have trouble) to dial it down. You’ll never notice the difference in temperature, but your water heater will have to work less and your energy bills will be lower.

2.     Test the temperature and pressure valve by lifting the valve lever part of the way up, then allowing it to snap back into place. This should be followed by a gurgling sound as water is briefly released from the tank into the drain tube. If not, the valve may need to be replaced.

3.     Flush the tank on a smaller scale. Rather than doing a full flush of the water heater, you can do a smaller one in much less time. To do this, just put a bucket under the drain valve and release the valve. When the bucket is full, close the valve back up and drain the bucket outside or into a sink. This will help get rid of sediment, but takes much less time than draining the whole tank.

It is also recommended that you get a plumber to inspect your water heater on a regular basis, according to the manufacturer’s recommendations. This three step plan is a good interim measure, however, and it only takes a few minutes each year.

Tags: , ,
Posted in bathroom plumbing, Plumbing, water heater | Comments Off

« Older Entries