Archive for the ‘clogged drain’ Category

How to Unclog a Kitchen Sink in Frisco

Tuesday, February 28th, 2012

There are lots of reasons why kitchen sinks clog in Frisco. And in order to unclog the sink, it is important to know why it clogged up in the first place. It is easy to suggest a simple solution but the “one size fits all” philosophy doesn’t always work.

As simple as it sounds, you don’t want to use a grease dissolving agent on a clog caused by a fork that is stuck sideways in a pipe. You also don’t want to mess around with the plumbing if the solution is as simple as using a snake or pouring some dissolver down the drain. If the clog is obvious you can save yourself a lot of time and effort.

If the drain is clogged, the easiest thing to do is to operate the garbage disposal, provided it is tied into the drain. But you don’t want to turn on the disposal until you have checked for obstructions in the drain, namely utensils. Remove any utensils before turning on the garbage disposal. Sometimes even the smallest amount of debris can stop up a drain and a simple flip of the disposal switch clears it away.

If that solution doesn’t work you may want to do the following procedures – in order – to unclog the drain.

  • Run extremely hot water in the sink. This can sometimes dissolve whatever is clogging the drain by breaking down the debris.
  • Use a plunger. A blast of forced air from a plunger can often do the trick. If the clogged drain is connected by pipe to another drain (a sink with two basins), you would need to plug the other drain when plunging. Forced air will find the least path of resistance and may bypass the clog and exit out another opening.
  • Use a liquid or granulated dissolver, poured directly into the clogged drain. There are many products on the market for this task. Make sure you read the instructions carefully before dumping chemicals into your drain.
  • Snake out the pipes. Stubborn clogs that are resistant to the above solutions may require that you use a hand-held or portable snake in the pipes leading to the drain. Again, read the instructions on how to operate the snake in order to avoid damage to the pipes, drain, or yourself!
  • If the clog persists, there may be a bigger problem going on. At this point you have to ask yourself if you feel comfortable taking the plumbing apart to find the cause of the clog. There could be other more serious problems going on further down the plumbing circuit, i.e. roots in the pipes.

The last “resort” may require the help of a plumbing professional. You have to ask yourself if you have the time and the knowledge to disassemble your drain and pipes. It may cost you more in the long run if you damage any parts during the procedure or create other “add-on” problems.

Remember to try the easiest solutions first and if you are still unable to unclog your drain, call Dial One Johnson Plumbing for a qualified plumber who will safe you time and peace of mind.

Tags: , ,
Posted in clogged drain, garbage disposal, Plumbing | Comments Off

Bathtub Drain Plumbing: Things Dallas Residents Should Know

Monday, January 30th, 2012

When Dallas residents think of clogged drains and plumbing problems, we most frequently think of toilets and kitchen sinks, but one of the most common drains to cause problems in a home is the bathtub. To avoid drain problems and to help fix any problems that might crop up, here are some tips for how to handle your finicky bathtub drain.

  • How the Bathtub Drain Works – A Bath tub drain works the same as the other drains in your home with a simple trap that ensures the safe transfer of water out of your home and blockage of sewer gasses from getting into your home. The drain itself is frequently open with a small crack – roughly a quarter inch – beneath a larger drain plug that can be lowered when you fill the tub. While the space is not large enough for objects like a bar of soap to enter, it is plenty large enough for hair, soap scum, and other small objects from a bath or shower to enter and start clogging that trap.
  • Cleaning the Drain – To cut down on how much hair and gunk actually gets into the drain you should take off the entire drain mechanism once a week and remove any excess hair. You should also use some form of wire device like a bent coat hanger or scrubber to reach in and remove any hair you can reach. There are specific plumbing devices to help with this as well, but a hanger works just fine assuming you do not have a heavy clog. It is also a good idea to run boiling water through your drain once every week to clear out any soap and hair build up. While most soap is water soluble, it can create a thick, greasy clog when combined with hair. Hot water can help to remove it before a clog occurs.
  • If a Clog Occurs – If a clog does occur, you should use the hot water method along with a plunger to try and clear out as much of the clog as possible. Avoid chemical use at all costs. Bathrooms are usually small rooms and even with the fan on, the fumes can be dangerous and the chemicals caustic on your pipes and tub. Baking soda and vinegar often help for small clogs, but otherwise, you should move on to a snake for physical clog removal.

If you have a clog deeper than the snake can reach or that you simply cannot affect with the tools listed above, it may be necessary to call a professional who can track your clog into the pipes and find where the root of the problem is. It might be just too deep in your drainage pipe or it could be a completely different area of your plumbing system.

Tags: , ,
Posted in bathroom plumbing, clogged drain | Comments Off