Archive for the ‘plumbing repair’ Category

Dallas Plumbing Tips: How to Use a Plumber’s Snake

Friday, March 16th, 2012

Let’s say your kitchen plumbing in Dallas is backed up and you can’t prepare dinner. Or your toilet is plugged and even the plunger isn’t fixing the problem. It may be time to call for the snake – plumber’s snake that is.

For those of you who are intimidated by tools, take note: you have nothing to fear from the snake. It is easy to operate and is an effective alternative to expensive plumbing repairs.

Okay, so you’ve decided to use a snake to unclog your pipe. Do you have one? If you rarely use a snake in your home you might want to consider renting one. Most tool rental shops have snakes in varying sizes for rent – from hand-held to electric. But it is a good idea to have one around for emergencies and you can find hand-held snakes for under $10 (often named “augers”).

The first thing you need to do is prep for the job. Make sure you have cleared out an area to work on the plumbing and that you have plenty of rags to mop up any spills or drips. It is a good idea to lay down some newspaper or plastic to keep the floor and cabinets dry, too.

Make sure you have access to the pipe by removing any drain covering. Obviously you will have directly access to the toilet drain. Before operating the snake you should put on a pair of rubber gloves to protect your hands from the metal coils of the snake and any debris that might be in the pipe.

Next, slowly feed the snake into the pipe. You may have to turn the snake in a clockwise direction to move it along. Once you have reached the clog – and you can usually tell when the snake stops feeding – it is time to rotate the snake into the clog and loosen it up. The head or tip of snake should be able to grab on the debris so that you can pull it back out and dispose of it. In the process, some of the debris may wash away down the pipe and that’s okay (well, as long as it doesn’t accumulate further down the circuit). You really want to use the snake head to “chew up” the debris for removal, rather than just pushing it further down the pipe.

Once you have removed the debris clogging the pipe, run hot water down the pipes to wash away any remnants. Replace the drain cover if necessary and clean up your mess. Voila!

If you have a stubborn clog that won’t snake out or if you just aren’t comfortable using a tool, call Dial One Johnson Plumbing to save you the effort.

Tags: , ,
Posted in bathroom plumbing, Plumbing, plumbing repair | Comments Off

How Much Water Does a Leaky Faucet Waste in a Dallas Home?

Wednesday, February 1st, 2012

Home owners in Dallas know that a leaky faucet is obnoxious for more than one reason. It represents a growing problem that will cost you money on your water bill, but it can be avoided with a little plumbing maintenance. Beyond all of that, it wastes a lot of water, putting undue stress on the environment. But, how much water does a leaky faucet actually waste with out some easy plumbing repair? It may not seem like much, but when added up over a period of time, that leaky faucet’s impact can be fairly substantial.

Okay, so a single drip every couple seconds may not seem like a lot of water. But, think about it this way. If you let your faucet drip every day, twenty four hours a day, it is definitely going to add up. Imagine what would happen if every faucet in your home was dripping or every faucet in your neighbourhood. It would not seem like such a small amount of water anymore.

In terms of how much water is actually wasted, it is impossible to tell for certain. After all, every drop of water from a faucet is a different size and falls at a different rate. But, for the most part the water coming from a faucet (according to the US Geological Survey) is between 1/5 and 1/3 of one milliliter. Using those calculations and 1/4 of a milliliter as an average, the USGS estimates that roughly 15,140 drips from a faucet equals one gallon of water.

It may not seem like much. After all, fifteen thousand drops is a LOT of drops. But, if your faucet dripped once every second every day, all day, it would only take four and a half hours to reach one gallon. Every day you would waste 5 gallons of water or 2,082 gallons per year. That is 10% of the average water used by a standard 3.5 gpf toilet on a daily basis. Now, imagine what happens if you have more than one drippy faucet, or if your bathtub leaks which will drip more water at a time or if the leak is larger than the average size.

In short, the cost of a leaky faucet may not seem like much, but as time passes, it can really add up and if it is not taken care of, the cost will only grow as the leak gets bigger and potentially new leaks start in other faucets of your home. Do not let it drip forever – take action now and cut down on the environmental impact you have, as well as your bill.

Tags: , ,
Posted in Plumbing, Plumbing Maintenance, plumbing repair, Richardson | Comments Off