CALL US TODAY
972.890.9818
serving you for over 50 years

Sizing a Tankless Water Heater for Your Addison Home

Posted on: May 30, 2012

Tankless water heaters are gaining popularity among Addison homeowners because of their on demand hot water supply and space-saving design. Although they are more expensive than traditional tank water heaters, on demand water heaters are more efficient, reliable, and easier to install and maintain. Before choosing to install a tankless water heater, however, you will have to decide which size will meet your hot water needs.

Rather than storing hot water in a tank, the tankless models heat the water with individual units located near the application where hot water is needed, such as a shower or washing machine. For larger homes, some of these smaller units cannot heat enough water for several applications running at the same time. You can also install a single tankless water heater for the entire house, or separate ones for appliances that use more hot water.

Finding the proper size and type will depend on the flow rate—measured  by a GPM (gallons per minute) number—that each fixture needs. Every application has a standard flow rate that must be added up in order to calculate the hot water demands for your entire home. For instance, if someone is using a sink with a 1.5 GPM at the same time another person is running a shower with a 2.0 GPM, the flow rate for the tankless unit would need to be at least 3.5 gallons per minute. You will have to add up the flow rate for all the applications in the house to get the minimum GPM figure for your tankless water heater.

In addition to flow rates, tankless hot water heaters are also measured by how much the water temperature needs to rise as it moves through the heating unit. You can determine the temperature rise for each application by subtracting the temperature of water coming in from the desired temperature going out. Once you add those together with the overall flow rates, you will know which tankless water heater can handle your overall hot water needs.

Before you buy an on demand hot water heater, it is best to talk to a professional plumber. While the flow rates and temperature rise for most household appliances are fairly standard, these numbers can vary because of several factors that plumbers are trained to calculate. Size is not the only factor to consider when shopping for a tankless water heater. Fuel type and efficiency should also be factored in to your purchase, which is another reason to talk to a licensed plumber.

If you aren’t sure what type or size of tankless water heater is right for your Addison home, call Dial 1 Plumbing to speak with one of our professional plumbers. We are always glad to offer our expert advice so that you can meet all of your hot water needs in the most efficient way possible.

 

Don’t stress about finances! We’ve got you covered!
Now offering financing options through Wells Fargo and GreenSky!
learn more